dwyer
distributor Honeywell
Saia Burgess

Building Management System

Thermostat TF428 Series

The TF428 RSBS/RSS series digital thermostat are designed for 3-speed fan and on/off valve control in a fan coil system, including:
 • 2-pipe cool only/heat only/manual changeover
 • 4-pipe manual/auto changeover (VC4013 valve only)
• Ventilation mode
 • Manual or automatic 3-speed fan control
• On/off water valve control

Download Datasheet


















SAIA PCD Series         

Digital input and output modules allow you to adapt the Saia PCD functions to your individual needs. After all, they can easily be plugged into the Saia PCD base device or a suitable I/O module holder

Download Datasheet

Water Flow Switch WFS Series

Honeywell provides WFS series water flow switches which have been designed to provide excellent performance where accuracy, reliability, and rugged construction are required. These flow switches are used in liquid flow lines carrying water or any fluid neither harmful to brass and phosphor bronze nor classified as a hazardous fluids. They can be wired to close one circuit and open a second circuit when liquid flow either exceeds or drops below the adjusted flow rate. The WFS series are recommended for liquid pressure and temperature as mentioned below and must not be used on lines carrying liquids below 0C.

Features & Benefits:

- These series may be used on liquids with high salt or chlorine content

- They may be also used outdoors

- They are designed for use only as operating controls

Download Datasheet

Motorize Damper CN Series

This non-spring return direct-coupled damper actuator provides floating and two-position control for:
• air dampers
• VAV units
• air handlers
• ventilation flaps
• louvers
• reliable control for air damper applications with up to 10 sq.ft. / 44 lb-in. (5 Nm) and 20 sq.ft. / 88 lb-in. (10 Nm) (seal- less damper blades; air friction-dependent)

Download Datasheet




Micro Switch BZC SeriesValve Actuator ML 7421 Series

The ML6421A,B Non-Spring Return Electric Linear Valve Actuators are suitable for use with low-voltage, single-pole double-throw (spdt), Series 60 two-position and floating controllers. These actuators operate standard Honeywell valves in heating, ventilating, and air conditioning (HVAC) applications. The ML7421A,B Non-Spring Return Electric Linear Valve Actuators are modulating control actuators used with controls that provide an analog output of 0 to 10 Vdc or 2 to 10 Vdc. These actuators operate standard Honeywell valves in HVAC applications. An internal selector plug can be used to reverse the direction of action.

Download Dataseheet

Motorized Valve VC Series

Honeywell - Building Management System - Motorized Valve VC Series

Honeywell VC Series balanced 2-position hydronic valves are used in domestic and small commercial heating and cooling applications to control the flow of hot and/or cold water. They consist of an actuator, valve and a cartridge assembly 2-way valves are designed for on-off zone control of domestic systems. 3-way valves can be piped for either diverting or mixing valve applications in domestic central heating and/or cooling systems. Both versions can be used to control indi-vidual fan coil, radiator, space heater or convector applica-tions. Depending on the model selected they can be con-trolled by a low or line voltage SPST or SPDT controller such as a room thermostat, aquastat or flow switch.

Download Datasheet


Butterfly Valve V4 -ABFW Series

V4 Actuated Wafer Type Butterfly Valves are equipped with standard On-Off or modulating control quarter-turn electric actuator. The V4 series can also provide feedback output signal dry contact for On-Off version; 0~5V, 0~10V, 4~20mA selected by DIP- switch for modulating version. It has manual override non-clutch design. Manual operation can be operated without any lever, clutch or brake upon power voltage

Features & Benefits:

- Wide size range

- Irreversible worm gear.

- Visual mechanical position indicator for accurate visual reference of valve position.

- Anti-condensation heater and 2 aux. limit switches on standard model

- Enclosure IP67

Download Datasheet

Balancing Valve BLC Series

The balancing Valve is designed for double regulating, control and shut off valve with built-in pressure drop measuring facility.

Download Datasheet


error: Content is protected !!