Badger Meter

Electromagnetic Flow Meter

PT. Swahusada adalah distributor dari Badger Meter. Badger Meter mempunyai banyak produk flowmeter untuk gas dan air. Badger Meter menyediakan berbagai macam flowmeter mulai dari electromagnetic flow meter, ultrasonic flowmeter, impeller, nutaring disc, turbine flowmeter, variable flowmeter dengan berbagai macam material untuk memenuhi kebutuhan industri anda. Badger Meter flowmeter juga dilengkapi dengan sertifikasi dari pihak ketiga dan special approvals yang dipastikan aman digunakan bagi industri apa-pun, termasuk industri food and beverage. 

Size: 1/8"-80"

100% made in Europe dan USA

Custom made liner, flange, housing


Kelebihan Badger Electromagnetic flow meter


1. Zero Straight Run 

2. Accuracy +-0.2% 

3. Bi directional 

4. Variety of output 


Modmag 

100% made in Europe (all parts and components) 

High accuracy (+-0.2%) and high repeatability 0.1%

Bidirectional and linear output signal (no conversion needed)

Cleanable (SIP/CIP)

Suitable for aggresive and corrosive fluid

Measureable fluids: water, waste water, beer, milk, juices , all liquids of  conductivity  5 µS/cm

Non Measureable: Oil, petrol, diesel, gasoline, toluene, fuel oil, kerosene, ethanol, acetone, etc. Hydrocarbons in general are not suitable for ModMAG meter. Demineralized water with a conductivity less than 20 µS/cm are also not suitable for ModMAG meter.


ModMAG® M1000 – "Low budget"

Sizes: DN 6 to DN 500

Accuracy: ±0,3% of actual flow ±2 mm/s

Power supply: 92 - 275 VAC optional 9 - 36 VDC

In/Outputs: 1 x analog / 2 x digital out / 1 x digital input

Interface

RS-232/RS-485 Modbus RTU,  Modbus TCP/IP,  M-Bus wired or HART


Special features:

Data logging (30.000 records)

Enclosure:IP 67


Typical markets: Water/Waste water, food, industries, OEM, etc.

ModMAG® M2000 – "Allrounder"

Sizes: DN 6 to DN 2000

Accuracy: ±0,2% of actual flow ±1 mm/s

Power supply:85 - 265 VAC / 9 - 36VDC

In/Outputs: 1 x analog / 4 x digital out / 1 x digital input


Interface:

RS232 Modbus RTU, Modbus RTU(RS-485), Modbus TCP/IP, HART,

ethernet/IP,BACnet /IP , BACnetMS/TP (BTL certification),

Profibus DP,wired M-Bus, ORION cellular end point


Special features:

Optional Data logging (10.000 records),

Verification device: Yes

Special approvals: OIML R49, CEN EN 14154 / ISO 4064, MID MI-001

Enclosure:IP 67


Typical markets:Water/Waste water, food, industries, HVAC, etc.

M3000/M4000 “Hazarduous Areas”


Sizes:DN 6 to DN 600

Accuracy:±0,2% of actual flow ±1 mm/s

Power supply:85 - 265 VAC / 24 VDC

In/Outputs:1 x analog / 4 x digital out / 1 x digital input


Interface:

ModMAG 3000: Standard Communication, Modbus RS-485

ModMAG 4000: Standard Communication


Special features:No


Verification device:Not available


Special approvals:M3000 - ATEX Zone 2 / FM and CSA Class I Div II

M4000 - ATEX Zone 1 / FM and CSA Class I Div I

Enclosure:M3000 NEMA 4X/6P (IP66/IP67) enclosure FM approved for Class I,

Div 2 hazardous locations.

M4000 NEMA 4X (IP66) enclosure FM approved for Class I,Div 1 hazardous locations,


Typical markets:Chemicalt industry, pharma, oil and gas, refining

ModMAG® M5000 – "Battery-powered"

Sizes: DN 15 to DN 600

Accuracy:±0,4% of actual flow ±2 mm/s

Power supply:by battery / battery life time up to 20 years, (optional battery back up version)

In/Outputs:4 x digital out / 1 x digital input


Interface: ModBus RTU RS232, M-Bus, Modbus RTU RS485


Special Features:

Data logging (7.200 records),optional IP68 compact version


Verification device:Yes


Special approvals:OIML R49, CEN EN 14154 / ISO 4064, MID MI-001


Enclosure :M5000 IP67/IP68 protection class


Typical markets:irrigation

Modmag Series with BTU Calculator

FC-5000-BTU calculator for M1000/M2000

Output :Pulse,4-20mA, Modbus, BACnet,  RS 485, USB

Control panel/wall mounted

error: Content is protected !!